WOODEN GARDEN PRODUCTS FOR B2B ORDERS
For quotation, send the product type, dimensions, intended placement and exposure condition, expected filled or loaded condition when it affects the structure, quantity and destination market. Add a drawing, photo or sample when available.
Indoor, covered, balcony, decking and direct-ground applications can require different drainage, base clearance, hardware and finish specifications.
Select the closest product type, then send the dimensions, placement, components and packing details available for your order.
For indoor, covered, balcony, decking and direct-ground applications.
Specify the outer and usable size, panel thickness and construction, drainage, liner or tray, base or feet, and intended placement.
View Wooden Planter Boxes ›For direct-ground growing beds, modular systems and flat-pack garden programs.
Specify the footprint, panel height, intended soil depth, open-bottom or base condition, corner and joint construction, and flat-pack format when required.
View Raised Garden Beds ›For single pots, tiered displays and shelf-style formats.
Specify pot size, overall and shelf dimensions, expected use condition, base or floor contact, placement and assembly format.
Request a Plant Stand Quote ›For produce displays, stackable storage, garden retail and decorative ranges.
Specify the inner and outer size, slat spacing, handle, stacking requirement, stored product or expected load, and packing method.
View Wooden Crates ›For garden tools, cushions and accessories in covered or exposed locations.
Specify usable internal space, lid, ventilation, floor or base clearance, expected contents, moisture or exposure condition, and hardware.
Request an Outdoor Storage Quote ›For seasonal displays, signs, installed decorations and private-label garden ranges.
Specify dimensions, installation or mounting, artwork, visible surfaces, finish, outdoor exposure when applicable, SKU details and packing.
Request a Garden Decoration Quote ›See the production stages used for custom wooden product orders.
Define the floor or surface contact, drainage tray, edge condition and visible-surface finish.
Account for humidity, occasional rain, the drainage path and any exposed edges or hardware.
Define how water drains, how the base contacts the floor or deck, and whether ground clearance is required.
Specify the soil-contact or ground-clearance condition. For raised beds, include the panel height, joints and expected filled condition.
Specify the rain, sunlight and humidity exposure, maintenance expectation, drainage, exposed hardware and finish requirement.
Specify the drainage-hole position, liner or tray design and intended water path together. If a liner is required, include the material when specified, whether it is removable or fixed, whether it is perforated or closed, and any tray requirement.
Provide the usable inner dimensions, intended soil depth, pot size when relevant, and expected filled condition or stored contents. These inputs establish the structural requirement for quotation and sampling.
Choose an open bottom, raised feet, full base, slats, tray or liner according to whether the product will sit on direct soil, concrete or paving, decking, a balcony or an indoor surface.
If the order has specific acceptance requirements for warping, checking, splitting, panel or joint movement, visible knots or natural variation, state them in the purchase specification, drawing or approved sample.
Specify the hinge, screw, fastener, bracket, latch or connector, whether its position is exposed or protected, and any buyer-required corrosion-resistance or hardware standard.
Material and finish selection should reflect rain, sunlight, humidity, ground contact, the required appearance, expected maintenance and any destination-market requirement supplied by the buyer.
Available material options include pine, paulownia, poplar, plywood, bamboo, rubberwood, acacia and MDF. Select the material from the structure, product dimensions, filled or stored condition, exposure and packing method. MDF may be considered for dry indoor decorative products. Outdoor or high-humidity applications require the material, construction and finish to be selected for the specified exposure condition.
Use the required color, coating coverage and edge treatment as acceptance points. Exposure and maintenance requirements still need to be specified.
Clear lacquer retains more of the visible wood appearance. Its use depends on placement, exposure, maintenance and the required surface effect.
Natural oil leaves a more natural-looking surface. Confirm the exposure condition, appearance target and expected maintenance for the order.
Stain changes the wood tone while leaving part of the grain visible. Approve the final color on the selected material.
B2B GARDEN PRODUCT EXECUTION
Indoor, covered, balcony, decking, ground-contact and fully exposed use lead to different drainage, base, hardware and finish specifications.
Confirm the drainage, liner or tray, base, feet, hardware and flat-pack components required by the product design.
Tie dimensions, assembly, drainage, hardware, surface, components and packing to the approved drawing, purchase specification or agreed sample.
Coordinate SKU identification, labels, supplied barcodes, instructions, hardware bags, component separation, surface protection and carton dimensions.
Confirm whether each SKU will ship assembled, part-assembled or flat-packed. Record the component count, joints, loose-part restraint, screws or fittings, and hardware bag for the final production version.
Instructions must match that version. Confirm SKU identification, edge and surface protection, carton fit and the packed dimensions before freight calculation.
See how bulk wooden product orders are protected for export packing and shipment.
QUALITY AND ACCEPTANCE POINTS
Confirm the overall and usable inner dimensions, panel thickness, slat or gap dimensions, corner and joint construction, base structure and ground clearance required by the product.
Confirm drainage position and the specified water path, liner or tray fit, open-bottom or base condition, flat-pack or assembled fit, and component fit.
Apply the specified acceptance points for sanding, edges, visible finish, warping, checking, splitting, joint condition, hardware fit and exposed hardware. Use the limits stated for the order.
Confirm screws or fittings, the hardware bag, liner or tray, instructions, labels, SKU identity, flat-pack components, surface protection, carton fit and internal restraint.
Numeric tolerances, appearance limits and other acceptance criteria should follow the approved drawing, purchase specification or agreed sample where applicable.
See how dimensions, finish, hardware and packing are checked in our quality control process.
Send the product type, dimensions, intended placement and exposure, expected filled or loaded condition when it affects the structure, quantity and destination market. Include a drawing, photo or sample when available.
Yes. Send a drawing or photo to define the size and visible design. A physical sample can also establish joints, finish, hardware and other details that must match an existing product.
Yes. Specify the drainage-hole position and intended water path. If a liner is required, define its material when specified, whether it is removable or fixed, whether it is perforated or closed, and any tray requirement.
Garden products can be flat-packed when the structure allows. Confirm the joints, components, screws or fittings, hardware bag, assembly instructions and carton with the approved sample.
Projects may specify water-based paint, clear lacquer, natural oil or stain. Select the finish from the placement, rain and sunlight exposure, humidity, ground contact, required appearance, maintenance expectations and destination-market requirements supplied by the buyer.
Provide the product type, dimensions, placement, exposure, quantity and destination information available for your order.
Include the product type, dimensions, placement and exposure, quantity, destination and packing requirement. Add a drawing, photo or sample when available so the quotation can reflect the required structure, drainage, finish and components.
